HUSKEY™ LUBE-O-SEAL
Description
HUSKEY LUBE-O-SEAL is a versatile, pure synthetic, completely waterproof grease containing PTFE. It is formulated to seal out water and lubricate under the most adverse conditions. HUSKEY LUBE-O-SEAL with its highly adhesive qualities and high load-carrying characteristics forms a tough durable film of lubrication that prevents metal-to-metal contact even under severe shock loads. HUSKEY LUBE-O-SEAL is also NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur.
Advantages
- NSF/U.S.D.A. H-1 *Registered
- WATERPROOF
- NON-MELTING
- CONTAINS PTFE
- KOSHER APPROVED
- BIODEGRADABLE
- CHEMICALLY RESISTAN
- NON-STAININ
- WIDE TEMPERATURE RANGE
- REDUCES WEA
- PREVENTS RUST & CORROSIO
- HIGH DIELECTRIC STRENGTH
*NSF H-1 Registration No. 059322
Usage
HUSKEY LUBE-O-SEAL with its waterproof and chemical resistant capabilities is an excellent lubricant on all sliding surfaces, gears and slow to moderate speed bearings (about 1000 RPM maximum) operating in WET or DRY conditions from 20°F to 350°F. Due to its pure synthetic base, coupled with the addition of sub-micron size PTFE, HUSKEY LUBE-O-SEAL is an excellent choice for applications in many Industries, which requires a clean, tenacious, anti-wear grease. Because of its NSF/U.S.D.A. H-1 *Registration, HUSKEY LUBE-O-SEAL is outstanding for use in food processing plants, where equipment wash down is an everyday requirement and water Industries, where contamination with conventional petroleum lubricants is a primary environmental concern.
HUSKEY LUBE-O-SEAL is compatible with most rubbers and plastics and is a superior lubricant for “O” rings. Some of its diversified uses include:
- OPEN GEARS
- FOOD EQUIPMENT
- SLIDES AND WAYS
- STERILIZER CHAINS
- GASKETS AND “O” RINGS
- CONVEYORS
- VALVES
- BUSHINGS
- TRUNNION
- POOL EQUIPMENT
CAUTION: BEFORE PRODUCT IS UTILIZED IN AUTOMATIC LUBRICATION EQUIPMENT, PLEASE CONSULT THE HUSK-ITT CORPORATION FOR RECOMMENDATION.
Package Availability
- 3 oz. Tubes
- Convenient Disposable Gun Loader 14 oz. Cartridges
- 5 gal. Pail
- 15 gal. Keg
- 55 gal. Drum
Typical Specifications
Product: LUBE-O-SEAL | |
Solid Lubricant: PTFE | NSF/U.S.D.A. Rating: H-1 |
Base Oil: Synthetic | Thickener: Synthetic |
Color: Translucent White | Texture: Smooth & Tenacious |
| Test | ASTM Test Method | Results |
| N.L.G.L.Grade | 2 | |
| Worked Penetration 60 Strokes 10,000 Strokes | D-217 D-217 | 280 290 |
| Base Oils Viscosity, cSt @ 100°C cSt @ 40°C | D-445 D-445 | 208 5600 |
| Pour Point, °F | D-97 | 5 |
| Flash Point, °F | D-92 | 395 |
| Dropping Point °F | D-566 | None |
| Evaporation Loss, % (10 hours @ 210°F) | D-972 | 1.0 |
| Corrosion Preventative Test | D-1743 | PASS |
| Water Washout, % Loss | D-1264 | 0.01 |
| Timken OK Load, lbs. | D-2509 | 40 |
| 4-Ball Wear Scar, mm (40 Kg, 75 ° C, 1 hr. @ 1200 rpm) | D-2266 | 0.57 |
| Dielectric Strength, KV | D-877 | 30 |
 |  |
The name of this product or group of products is for product identification only. HUSK-ITT Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT Corporation sales personnel are not authorized to amend this warranty limitation.