HUSKEY™ LVI-50
Description
HUSKEY LVI-50 is a multi-service, non-melting, waterproof grease fortified with PTFE. It is designed specifically to lubricate, seal out water, and resist chemical attack under the most demanding conditions. HUSKEY LVI-50 with its excellent film strength and extreme pressure qualities, forms a tough durable film of lubrication that prevents metal to metal contact. HUSKEY LVI-50 is a pure synthetic based lubricant that is NSF/U.S.D.A. H-1 *Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur.
Advantages
- NSF/U.S.D.A. H-1 *Registered
- WATERPROOF
- NON-MELTING
- KOSHER APPROVED
- BIODEGRADABL
- CHEMICAL RESISTAN
- NON STAININ
- WIDE TEMPERATURE RANG
- REDUCES WEAR
- PREVENTS RUST & CORROSION
*NSF H-1 Registration No. 059323
Usage
HUSKEY LVI-50 with its waterproof and chemical resistant capabilities is an excellent lubricant on all sliding surfaces and slow to high speed bearings, operating in adverse conditions. Because of its pure synthetic base, high load carrying capacity and wear protection characteristics, HUSKEY LVI-50 is far superior to petroleum, white oil based greases on the market today. This makes HUSKEY LVI-50 a truly multi-service grease in both food grade and non food grade applications operating in temperatures from -10° F to 325°F. Due to its NSF/U.S.D.A. H-1 *Registration, HUSKEY LVI-50 is an excellent choice for both Food Processing plants, where equipment wash down is an everyday requirement and Water Industries, where contamination of conventional petroleum lubricants is a primary environmental concern. HUSKEY LVI-50 is compatible with most rubbers and plastics and is a superior lubricant for “O” rings. Some of its diversified uses include:
- PUMP BEARINGS
- BUSHINGS
- CAN SEAMERS
- VALVES
- GASKETS AND “O” RINGS
- CONVEYORS
- STERILIZER CHAINS
- SLIDES AND WAYS
- POOL EQUIPMENT
- ELECTRIC MOTOR
- WATER FILTER
- UNIVERSAL JOINTS
Package Availability
- Convenient Disposable Gun Loader 14 oz. Cartridges
- 5 gal. Pail
- 15 gal. Keg
- 55 gal. Drum
Typical Specifications
Product: LVI-50 | |
Base Oil: Synthetic | Thickener: Synthetic |
Texture: Smooth & Tenacious | Color: Translucent White |
Solid Lubricant: PTFE | NSF/U.S.D.A. Rating: H-1 |
TEST | ASTM TEST | RESULTS |
N.L.G.I. Grade | — | 2 |
Worked Penetration 60 Strokes 10,000 Strokes | D-217 D-217 | 280 290 |
Base Oil Viscosity, cSt @ 40°C cSt @ 100°C | D-445 D-445 | 781 42 |
Pour Point, °F | D-97 | -10 |
Flash Point, °F | D-92 | 325 |
Dropping Point, °F | D-566 | NONE |
Evaporation Loss, % , (10 hours @ 210°F) | D-972 | 1.5 |
Corrosion Preventative Test | D-1743 | PASS |
Water Washout, % Loss | D-1264 | 1.9 |
Timken OK Load, lbs | D-2509 | 35 |
4-Ball Wear Scar, mm (40 Kg, 1 hr. @ 1200 rpm, 167°F) | D-2266 | 0.50 |
Dielectric Strength, KV | D-877 | 30 |
WGK (German Water Classification) | — | 0 |
NSF International Registered | Kosher Certified |
The name of this product or group of products is for product identification only. HUSK-ITT Corporation. makes no warranties, representations or conditions of any kind expressed or implied, whether for merchant ability or fitness with respect to these products The final determination of the suitability of the products for the application contemplated by the user is the sole responsibility of the buyer. HUSK-ITT Corporation sales personnel are not authorized to amend this warranty limitation.